全局力平衡PDC钻头布齿优化设计

针对聚晶金刚石复合片(PDC)钻头在钻井破岩过程中因受力不平衡，导致钻井倾斜、井径扩大、钻头产生横向振动和涡动，造成钻头早期失效的问题，基于已有PDC钻头切削力学知识，构建了PDC钻头弯曲力矩及全局力平衡布齿优化设计模型，并提出模型求解方法。布齿设计实例结果表明，采用全局力平衡布齿设计方法得到的布齿结构可使PDC钻头在不同进尺条件下均能保持全局力平衡状态，尤其低进尺（小于1 mm）时的力平衡状态得到极大改善，提高了PDC钻头的钻井稳定性，对于改善钻头受力、提升钻头使用寿命、提高钻井质量与效率具有重要意义。     

Drilling machinability of engineering ceramics under low-frequency axial vibration processing by sintering/brazing composite diamond trepanning bit

Thin-wall diamond trepanning bits are extensively used for processing hard and brittle materials such as engineering ceramics. However, it is difficult to achieve high-efficiency processing of engineering ceramics at a constant feed speed, because of high dynamic compressive strength, high hardness, and low density of engineering ceramics. In this study, a novel composite diamond bit combining sintering and brazing has been designed, along with the low-frequency axial vibration technology, to realize the continuous hole processing of engineering ceramics. Drilling experiments have been conducted on Al₂O₃ and SiC engineering ceramics with a constant feed speed. The variation of axial force, micromorphology of hole wall surface drilled, as well as the method of removing nesting during the drilling process were analyzed. According to the results, the novel composite diamond bit fabricated by combining sintering and brazing, can achieve the continuous hole processing of engineering ceramics at a constant feed speed, including Al₂O₃ and SiC. Compared to the conventional drilling (CD), the low-frequency axial vibration drilling (LFVD) can significantly reduce the axial force, and produce fewer plastic scratches on the hole wall surface drilled. In particular, the automatic blanking ratio approaches to 100% by LFVD, and only about 73.58% by CD. It can be concluded that LFVD technology can be used to realize continuous hole processing of engineering ceramics. The research results achieved in this study show that the drilling machinability of engineering ceramics by LFVD and novel composite diamond bit is good. Accordingly, this study provides a useful reference for continuous processing or batch production of engineering ceramics at a constant feed speed.     

表面织构形状对牙轮钻头轴承摩擦学性能影响的实验研究

牙轮钻头滑动轴承作为钻头破岩过程中传递载荷的关键部件,在低速重载的钻井过程中易发生黏着磨损失效。为改善牙轮钻头滑动轴承的耐磨性能,利用纳秒激光雕刻技术,在牙轮钻头滑动轴承轴颈表面加工了面积比为10%、深度为20μm的圆形、矩形、三角形及复合织构;基于赫兹相似理论,设计近似模拟钻头轴承工况的环-块配对副单元实验方案,并在UMT摩擦试验机上开展织构形状对钻头滑动轴承摩擦副摩擦因数、磨损量、温升变化和微观形貌影响规律的实验研究。结果表明:仿生织构的形状及布置方式对减摩和耐磨效果影响极大,其中圆形、矩形织构的减摩和耐磨性能最优,其次为三角形织构,而复合织构反而增大了摩擦因数及磨损量;单一织构对试件磨损量及温升的影响不大,而复合织构在增加摩擦的同时温度有明显升高,不利于井下高温环境下延长牙轮钻头寿命。     

扩孔钻头在水平定向井中的应用

传统扩孔钻头在长距离水平定向井应用过程中出现泥包问题时,由于钻速变慢易造成钻进轨迹偏离原井眼,而且起钻时由于抽吸压力对井壁的作用易造成井壁压差坍塌,影响井下钻具仪器安全,增加辅助时间和钻井成本。为解决该问题,通过总结施工经验,结合数值模拟理论实验优化改进扩孔钻头,并在山西某井田煤层气水平井钻井工程项目中进行工业性试验,与传统扩孔钻头相比平均钻时减少38.9%,大大减少辅助操作时间,钻进效率提高的同时减少钻井成本。     

Detection Technique of Software-Induced Rowhammer Attacks

Side-channel attacks have recently progressed into software-induced attacks. In particular, a rowhammer attack, which exploits the characteristics of dynamic random access memory (DRAM), can quickly and continuously access the cells as the cell density of DRAM increases, thereby generating a disturbance error affecting the neighboring cells, resulting in bit flips. Although a rowhammer attack is a highly sophisticated attack in which disturbance errors are deliberately generated into data bits, it has been reported that it can be exploited on various platforms such as mobile devices, web browsers, and virtual machines. Furthermore, there have been studies on bypassing the defense measures of DRAM manufacturers and the like to respond to rowhammer attacks. A rowhammer attack can control user access and compromise the integrity of sensitive data with attacks such as a privilege escalation and an alteration of the encryption keys. In an attempt to mitigate a rowhammer attack, various hardware- and software-based mitigation techniques are being studied, but there are limitations in that the research methods do not detect the rowhammer attack in advance, causing overhead or degradation of the system performance. Therefore, in this study, a rowhammer attack detection technique is proposed by extracting common features of rowhammer attack files through a static analysis of rowhammer attack codes.     

直接检测式光接收机中的噪声分析

提出了基于窄带高斯过程的光接收机模型,改进了基于Karhunen-Loève变换的光接收机模型以包含波分复用（WDM）系统中的主要传输损伤. 得到了2种模型各自条件下判决电流的统计特征,并证明了2种方法在一定程度上是一致的. 所得解析结果与Monte-Carlo仿真结果精确吻合,可用于误码率的精确计算. 通过比较,说明高斯近似法估算的误码率过大,故其应用范围受到限制. 改进的Karhunen-Loève变换法具有很强的可扩展性,通过推广可以包含更多的因素,因此该方法可以作为IM-DD光传输系统性能精确评估的通用方法.     

SLB56／75型“三合一”取心钻进系统

论述了将绳索取心、螺杆钻、不提钻换钻头三项技术结合在一起的新型取心钻进系统。介绍了系统的结构、工作原理及其技术性能参数和操作要点。     

旋挖钻进中硬岩及卵砾层钻头结构及施工工艺研究

旋挖钻进技术作为一种高效优质的钻进方法近年来广泛地被用于公路、铁路及大型水电站基础工程施工建设中，取得了良好的社会效益和经济效益。探讨了在卵砾石、漂石等复杂地层以及坚硬基岩中进行旋挖钻进所用钻头的结构及其施工工艺。     

长春市轻轨工程大漂石地层灌注桩成孔钻进技术

结合长春市轻轨工程斜拉桥钻孔灌注桩施工实例，介绍了大漂石地层的筒钻法钻进原理、潜孔锤钻进工艺、岩心聚能爆破工艺及筒钻回转切石工艺等，为该类地层的顺利成孔成桩总结出了一套切实可行的施工方法。